Uni-Kote Semi-Gloss Oil Enamel #P-400
In stock
Reconfirm the price with seller
- Customer pickup,
- Courier
- In detail
Products of other enterprises
Description
General Description:
An interior/exterior semi-gloss oil based enamel combining an attractive lustre with exceptional durability.
Common Usage:
This is a scrubbable enamel good for use on walls and woodwork as well as ferrous metals.
Color: White, standard and custom colors.
Finish: Semi-Gloss
Coating Systems:
Primer Coats:
Use Anchor #P-1507 Undercoater for wood, #P-1508 for walls. Consult your Anchor representative for specific job recommendations.
Surface Preparation:
Paint only over clean and dry surfaces. Remove all loose paint, oil, grease, dirt, chalk or other contaminants that would hinder the performance of the coating. Mildew must be killed by scrubbing with a solution of a non-soapy detergent such as T.S.P. (Tri-Sodium Phosphate), household bleach and warm water. Thoroughly rinse affected area and let dry prior to painting. Repair all damaged areas and repair any cracks or splits with appropriate caulk or filler. Glossy surfaces should be sanded. On unfinished porous surfaces such as concrete block, a block filler should be used prior to priming.
An interior/exterior semi-gloss oil based enamel combining an attractive lustre with exceptional durability.
Common Usage:
This is a scrubbable enamel good for use on walls and woodwork as well as ferrous metals.
Color: White, standard and custom colors.
Finish: Semi-Gloss
Coating Systems:
Primer Coats:
Use Anchor #P-1507 Undercoater for wood, #P-1508 for walls. Consult your Anchor representative for specific job recommendations.
Surface Preparation:
Paint only over clean and dry surfaces. Remove all loose paint, oil, grease, dirt, chalk or other contaminants that would hinder the performance of the coating. Mildew must be killed by scrubbing with a solution of a non-soapy detergent such as T.S.P. (Tri-Sodium Phosphate), household bleach and warm water. Thoroughly rinse affected area and let dry prior to painting. Repair all damaged areas and repair any cracks or splits with appropriate caulk or filler. Glossy surfaces should be sanded. On unfinished porous surfaces such as concrete block, a block filler should be used prior to priming.
Contact the seller
Uni-Kote Semi-Gloss Oil Enamel #P-400
We recommend to see