Series 9100 Fiberglass Pipe

Fiberglass Pipe and Fittings for Corrosive Industrial Service

Uses and Applications:

• Chemical Proceess Piping
• Organic Chemicals
• Acid Drains
• Corrosive Services
• Process Plant Piping
• Power Plant Piping
• Plant Piping
• Water Treatment Piping
• Brine and Brackish Water

Description:

• Filament wound fiberglass reinforced composite pipe.
• ASTM D-2996 Classification Type 1, Grade 2, Class E.

Advantages:

• Working pressures from NBS-PS-15-69 Duct to 450 psi+, depending upon size and wall thickness.
• Vacum to -14.7 psig for all sizes, by selection of wall thicknesses, ribs and filament wind angle.
• Available for earth burial, all depths, with selection of wall thickenesses, ribs and filament wind angle.
• Weighs 1/6 as much as steel. Thus, lower installation costs.
• The Resins used in Series 9100 Pipe meet the requirements of F.D.A. Regulations 21-CFR-175.105 and 21CFR 177.2420.
• Smooth inner surface produces very low frictional loss for reduced pumping and fan blower costs. Hazen-Williams flow coefficient under 150.
• Recommended for a wide range of corrosion applications. Consult with Beetle Plastics or the resin manufacturer for specific project recommendations.