HB-200/DA-213 Adjustable Veneer Anchor

The HB-200/DA-213 is an adjustable veneer anchor.

• The L-shaped plate section has numerous ribs for added strength and 9/32" holes for connecting screws.
• The eyelets allow pintle insertion (1 1/4" maximum allowable eccentricity) and are sized to prevent in-and-out movement beyond allowable tolerances.
• HB-200/DA-213 replaced the HB-200 Veneer Anchor

GAUGES:

• 14 ga. or 12 ga. thick

AVAILABLE FINISHES:

• Hot-dipped galvanized or Type 304 stainless steel; Type 316 optional

DIMENSIONS:

• Pintle lengths 3" (76 mm), 4" (102 mm) or 4 3/4" (121 mm)

NOTES:

• H&B recommends 16" x 16" spacing
• Veneer can be reinforced with optional Seismiclip® Interlock System (HB-200/DA-213 S.I.S. )
• Legs fabricated to accommodate up to 6" thick insulation and/or wallboard combination (state thickness when ordering)
• Also available:HB-200-X : features three pronged punch-outs that project from the back of the anchor. The prongs prevent positive wind-loads from crushing the wallboard by transferring these loads to the back of the stud.