6” Wet Prime Centrifugal Trash Pump MSP TP-150
In stock
Reconfirm the price with seller
- Customer pickup,
- Courier
- In detail
Products of other enterprises
Technical characteristics
- BrandPRiME
Description
Features
- Multiple pump applications, dewatering, tank transfer, tank cleaning, and transfer of industrial waste products
- Large Solid Handling Capability
- Large Fuel Tank
- Easy & Fast Set-Up
- Low Maintenance Costs
- High Reliability
- Powder Coated Frame
Applications
Construction: Pumping open pit dewatering, sewage bypass pumping, cleaning manholes, and filling water trucks.
Water Treatment: Pumping out neutralized sludge's, cleaning cesspools, and septic tanks.
Industrial: Pumping out sludge's, food processing pumping, bilge pumping, tank transfer, raw sewage and dirty water.
Trailer Specifications
| Model | TP-150/DZ/T |
| Frame Construction | 8" Square Tubing |
| Fuel Capacity | 48 US Gallons (181.7L) |
| Wheels & Tires | 15"/P205/75R15 Radial Tires |
| Axle Type | 3,500 lbs. Torflex |
| Lifting Bale | Heavy Duty Single Point |
| Tie Downs | (4) Heavy Duty D-Rings |
| Safety Chains | (2) Class III |
| Trailer Stand | 5,000 lbs. Adjustable Front & Rear |
| Trailer Lights | (2) DOT Approved Lights |
| Height | 69 ⅝" (176.85 cm) |
| Width | 67.5" (171.45 cm) |
| Length | 105.25 " (267.34 cm) |
| Weight | 1,875 lbs (850.5 kg) |
Engine Specifications
| Engine | Deutz 3FL2011 Diesel 36 HP @ 1,800 RPM |
| Engine Displacement | 2.33 Liter |
| Type | 3 Cylinder, Air-cooled Diesel Engine, Naturally aspirated, Direct INjection, Oil Cooler |
| Fuel Consumption | 1.0 Gallon per hour @ 1,800 RPM |
| Standard Equipment | Alternator, Muffler, Instrument Control Panel |
| Safety Shutdown(s) | High Oil Temperature, Low Oil Pressure |
Pump Specifications
| Pump Casing | Heavy Duty Class 30 Cast-iron with Volute |
| Pump Capacity | 1,200 GPM @ 1,800 RPM |
| Solid Handling | 2 ⅞" x 2.0" (72 x 50 mm) |
| Impeller | Two-vane, dynamically balanced, non-clogging open impeller, ductile iron construction with rear equalizer vanes to reduce axial loading, and increase mechanical seal life. |
| Mechanical Seal | Tungsten Carbide hardened seal faces for periods of short, dry running |
| Impeller Shaft | Carbon steel fitted with 316 stainless steel valve |
| Wear Plates | Abrasive resistant ductile iron front and rear |
| Discharge Check Valve | Weighted, full flow inlet to eliminate priming during start-up cycle |
| Bearings & Frame | Heavy-Duty grease lubricated bearing designed for axial and radial loading. Frame and bearing housing is constructed of Class 30 Cast-iron. |
| Maximum Operating Temperature | 212°F / 99.9°C |
| Maximum Suction Lift | 28' (8.53 m) |
| Maximum Operating Speed | 1,800 RPM (Engine) |
| Maximum Working Pressure | 65 PSI |
| Maximum Case Pressure | 115 PSI |
Additional Options
- Locking Battery Bar
- Skid Mounted Version
- Electric Trailer Brakes
- Hose Rack
Standard Features
- Maximum OPeration Time is 26 hours @ 1,800 RPM
- Heavy Duty Battery & Cables
- Camlock Hose Fittings
- Large Fuel Filtration
- Lockable Fuel Cap
- Fuel Gauge
- Heavy Duty Lifting Bale
- 5,000 lb. Front Jackstands
- Powder Coated Frame
- Highway Fenders
Contact the seller
6” Wet Prime Centrifugal Trash Pump MSP TP-150
We recommend to see