202XT - Building Entry SPD

These specifications describe the electrical and mechanical requirements for a high-energy transient voltage surge suppressor. The specified surge protective device shall provide effective high-energy surge diversion for application in ANSI/IEEE C62.41-2002 Location Category C3 environments. Testing per ANSI/IEEE C62.45-2002 using ANSI/IEEE C62.41-2002 Category C3 waveforms and amplitudes. UL1449 Listed to UL1449 3rd Ed Safety Standard for Surge Protective Devices. The specified surge protective device shall provide:
200,000 amps, per phase, of surge protection Five times redundancy per phase. Three times redundancy N-G (Wye and Split-Phase models) SCCR: 100kA AIC In : 20kA UL96A Lightning Protection Master Label Compliant MCOV (UL1449 3rd Ed): 115% minimum of nominal voltage MCOV (Varistors): 125% minimum of nominal voltage All mode protection, L-N, L-G, L-L, N-G Each MOV protected from over-current, thermal overload and monitored individually Self-diagnostics with comprehensive LED bar graph on front panel showing protection status of each phase and neutral-ground Audible fault alarm with silence switch Event counter with date and time of last event Remote alarm relay contacts (surge protected), Form C Micro-Z low impedance installation cable Twenty year warranty on entire system LIFETIME "NO NONSENSE" WARRANTY ON FIELD REPLACEABLE INTERNALLY FUSED PROTECTION MODULES. Replacement fused modules are sent from factory stock, located in Deer Park, Long Island, New York, USA.