Currency USD
13 ", 19", 25 "Metal Shear buy in Skokie
Buy 13 ", 19", 25 "Metal Shear
13 ", 19", 25 "Metal Shear

13 ", 19", 25 "Metal Shear

In stock
Reconfirm the price with seller
Shipping:
Seller
USA, Skokie
(View map)
+1(8 
Display phones
Description
The 3001 Guillotine Shear was originally designed in 1999. The first one was a 13" shear and continues in use in Accucutter's shop. The basic design has remained unchanged since that original shear and is now available in either a 13" 19" or 25" size; and in manual or air powered versions.

"Flip-Up Hold-Down"
Accucutter®'s exclusive "Flip-Up Hold-Down" is standard on all standard 3001 shears. When in the down position, it automatically applies pressure to the material to facilitate smooth, accurate cutting. When necessary, the hold-down may be flipped up out of the way to permit easy access to the blades.

Reversible Action
Most people working with smaller shears prefer a guillotine shear that cuts from the "left to right" while most people working with larger shears are accustomed to a guillotine shear that cuts from "right to left". To accommodate both, the 3001 may be set up to cut in either direction. The direction of the action is set at the time of initial assembly and may be changed at any time by following the instructions in the Operator's Manual. The reversible action feature is unique to Accucutter®'s 3001 and only applies to the 13" models.

Movable Handle
The shear handle may be installed on the left or right of the shear enabling right handed and left handed operators to use the same shear. The handle may be moved easily and independently of the shear cutting action discussed above.

Reversible Precision Drop-Off Bar
The Precision Drop-Off Bar is full width (12" or 24") and is an invaluable aid for making accurate, repetitive cuts. It has two mounting positions. It may be mounted to the top blade carrier. In this position it moves up and down with the top blade like the rear gauge on many larger guillotine shears. In upper position the rear gauge is above the material and doesn't interfere with the material as it falls away from the shear after it is cut. It also may be mounted to the bottom blade carrier in a fixed position like the rear gauge for most scissors type shears. In this position, it does not move with the upper shear blade, but can interfere with the material clearing the machine after it is cut. It slides on two alignment rods and is locked in position by turning a knob on each rod. This feature is only available on the 13" model.

Contact the seller
13 ", 19", 25 "Metal Shear
13 ", 19", 25 "Metal Shear
We recommend to see
Shipping method
Compare0
ClearSelected items: 0